Say Hello to littleBitty Joe! Joe is my school’s mascot! Speak to Joe and watch his eyebrows lift, whiskers vibrate, eyes illuminate, heart spin and hear him ROAR! Not only does his roaring affect work with our project, but it can definitely work with your littleBits project too! Your project could talk, scream, or say […]
I started with the Instructable from Kyle Brinckerhoff; http://www.instructables.com/id/Ardu-pong-the-Arduino-based-pong-console/ Thanks Kyle! and the following at Make magazine http://blog.makezine.com/archive/2007/08/arduino-pong.html and I see the original code is attributed to Pete Lamonica Thanks Pete!! I am using the paddles instead of the joy stick and I have made it for 2 players. Also I added some sound. I
A motion sensing soft-circuit interface. The following instructable will guide you through the construction of your own personalized Nama Instrument. I’d love to hear some feedback. Hope you like it and it serves you somehow! : ) Access http://www.viraseres.com/nama to download the project’s open source files and access the full description of the project. INTRODUCTION:
Construire Nama Instrument En Utilisant Arduino 1.0 Continue Reading
Conducting energy through people to stimulate tangible public interactions http://ijustwannaholdyourhand.com/ http://vimeo.com/56350598 What did we do? We put together an Arduino, some wire, a Mac mini and a DLP Projector, then created a pair of hands out of aluminum. We additionally 3D printed some wall plates that resemble light switch plates, but instead of holding an
Good morning, please take a seat and watch that tofu wobble. This is not CGI, it is honest work of a papercraftsman. These are, in fact, 16 different papercubes that switch places in each frame. That technique is commonly known as replacement stopmotion. Problem: It only works on the screen and not in reality. Therefore, some
This is a simple project of Android Bluetooth Car with Bluetooth control. Arduino controller is used To control the car used Android-device with a built-in accelerometer. Tilt forward – car goes forward, tilt to the left – car turns to the left, tilt back – car goes back. Speed of movement or rotation depends on how
Simple voiture RC pour débutants (Android contrôle via Bluetooth) Continue Reading
Is it a 3D Spherical Atmosphere Encapsulated Phosphorous Printer? YES! Is it a CNC Anti Gravity transparent Orb Machine! YES! Its The Bubblesteen Bubble Machine! The spherical miracle that kids and cats have been waiting for. It comes complete with robotic edge detection( when a bubble hits an edge it pops, thus the edge has been detected). Turn
Bubblesteen Bubble Machine à l'aide d'un Arduino Continue Reading
Important notice: Final (i.e. relevant) version is at the last step of this instructable. If you want to build a Simon, that is the recommended version. The rest of the steps show how this evolved from a bare-bones game for LED 13 and Serial (i.e. zero components) until my mail order came through 😉 Each
Assez Simple Simon – l'évolution d'un Arduino jeu Continue Reading
Materials: For Totoro: Felt: 1 black, 3 grey, 1 white, 1 beige Needle Black Thread Poly-fil stuffing Cardstock Scissors Pins Pen or chalk DIY Totoro Plush Tutorial HERE Totoro Pattern HERE For Umbrella: 3 or 4 different types of fabric Felt: 1 grey, 1 black 2 popsicle sticks Needle Black Thread LilyPad Arduino: LilyPad Arduino
LilyPad Arduino Totoro en Peluche avec un Parasol Continue Reading
Psycho Scooter Scramble is a blind-driving electric wheelchair game. It consists of two riders, strapped into electric wheelchairs, and two blindfolded pilots, who remotely control the wheelchairs from the sidelines based on information given over headset by their driver. The basic mechanic is simple: players must drive across the court to get a ball from
Psycho Scooter Scramble à l'aide d'un Arduino Continue Reading
French 
English