I love the Arduino as a simple and accessible controller platform for many varied projects. A few months ago, a purchased an Ethernet shield for my Arduino controller to work on some projects with a mate of mine – it was a massive hit – for the first time, I could control my projects remotely […]
Une taille de carte de crédit Ethernet Arduino compatible carte contrôleur Continue Reading
Digispark is an ATtiny85 based microcontroller development board come with USB interface. Coding is similar to Arduino, and it use the familiar Arduino IDE for development. Digispark is copyrighted by Digistump LLC (digistump.com) and the full license is here: http://digistump.com/wiki/digispark/policy Specification: Support for the Arduino IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source – 5v
Digispark de BRICOLAGE: Le plus petit USB Arduino Continue Reading
Arduilay is an 8 channel AC relay box for use with Arduino, Max/MSP, Processing, etc. I designed this system as an alternative to the USB>DMX 4 channel relay option. While DMX gives you dimming control, the setup is easily 5 times as expensive as this simple relay box. Step 1: Get all the parts To
Arduilay est Un 8 Canaux AC Boîte Relais Pour une Utilisation Avec Arduino Continue Reading
Thanks to: http://jeonlab.wordpress.com/ Since I have read an article on todbot blog, I bought a couple of Wii Nunchucks from ebay. I don’t remember how much I paid for them, but it was much cheaper than buying the accelerometer breakout boards. With the nunchuck data reading library shared by todbot (Thanks!), I could easily read the accelerometer data
Parts required (Hardware) Arduino Uno Board (1) TQFP 32 to DIP 28 Adapter (1) Link Atmega TQFP 32 pin chip (1) Atmega DIP 28 pin chip (1) 10K resistor (1) 16MHz crystal (1) 18pf – 22pf capacitor (2) Tact Switch (1) Jumper wires (few) LED (1) 560 Ohm resistor (1) 10uF electrolytic cap (optional) Breadboard
Burn Bootloader Arduino sur Atmega-328 TQFP et TREMPEZ les frites sur Breadboard Continue Reading
This is a very low cost and simple Arduino GSM and GPRS shield. We use the module SIMCom SIM900 . It’s the cheaper module now available in the market. The module is not simple to mount by an hobbyst, so we use the Breakboard TDGGSM_900 that we presented here . You can buy the GSM
Never again will you have to dismantle a finished project just to reuse an Arduino board! This tutorial will go through the steps involved in fabricating your own Arduino-compatible circuit using just ~$8 of parts (this includes the ATMega chip!). This is perfect for installing and embedding in permanent pieces, as you don’t need to waste a
Perfboard Hackduino Arduino compatible circuit Continue Reading
Episode 3 of AndroidTec, Formed by members thamind (Jon) chaostic (Lewis) & Computer Whiz (Jim) and introducing GuyCothal, who discusses about the amazing abilities of Arduino micro controller boards and how they can be used with Androids! Jason also made a guest appearance!
Microcontrôleurs Arduino, Lecteurs de Cartes, l'Impression 3D, GS4, Camera Flip! Continue Reading
I have been making my own Arduino’s on strip-board but recently bought some of the Evil Mad Scientist ATmegaxx8 Target Boards. While they weren’t designed as an Arduino board they are perfect to use as they have: – places for the crystal and capacitors (XTL and C1, C2) or resonator – place for the power
Arduino du Mal Savant Fou ATmegaxx8 Conseil de la société Cible Continue Reading
This is a set of simple, small form-factor, mini-shields that I created almost by accident. As I made more and more of them, I realized that they could be really useful. What started out as a way to use some spare parts, turned into a standardized form factor for a versatile, miniaturized Arduino shield. The
French 
English