I have my online classes going on (still -_-) and the problem is I have a hard time waking up early. So I end up missing my first class every day. And yes, I do keep an alarm for 7 am but I always turn it off and go back to bed. So I got […]
Stubborn Alarm – Doesn’t Stop Until You Brush Your Teeth Continue Reading
At long last I have managed to finish the Rainbow Word Clock! Once again, this one was inspired by Doug and his creations http://www.instructables.com/id/The-Wordclock-Grew-Up/ I have a fixation with RGB LED’s at the moment and I wanted to do something a little different. So, while it is still here (before my girlfriend nicks it!) I thought
Arc-en-ciel de l'Horloge de mots à l'aide d'Arduino Continue Reading
Features Arduino 328 Microprocessor is used to decode and display Time & date from the DCF77 “Atomic” Clock in Mainflingen near Frankfurt Germany The DCF77 signal is decoded using the fantastic new DCF77 library written by Udo Klein meaning the clock stays in sync and keeps perfect even with a massive amount of noise on
A fun, simple LED clock, that will give you the time to the nearest half hour using single-color LEDs. Parts needed are as follows: Arduino Nano 400 tie-point Breadboard Ribbon Cable DS1307 RTC IC 32.768 kHz Crystal (12) 10mm LEDs (12) 180 Ohm resistors (2) 10k Ohm resistors 0.1″ spaced, 12 wire ribbon cable, 7″
As hard as it might be to believe, I had never built an electronic clock of any kind. I’ve always thought electronic clocks were passe and not worth the time to design and build one. In addition, I thought that all interesting electronic clocks designs had already been built so why bother building an also
Moderne LED RGB de l'Horloge à l'aide d'Arduino Continue Reading
Hello everyone! This is my first instructable. This project is a 3D printed clock powered by a stepper motor and is controlled by an Arduino Uno. It was designed in OnShape over the course of a month. It keeps time very precisely and only needs to be plugged into a USB port once programmed. Credit
Yesterday I was going to start watching a movie, when me and my friend pedro decided to give up on the movie and build a binary clock. After sometime thinking on how to program it, we made it. It works beautifully, so I decided to show here how I’ve done. It may not be the easiest way
Gliderscore is a program developed by Gerry Carter that not only scores a model plane flying competition, but provides timing for the various flying tasks One feature of Gliderscore Timer is that it outputs a Serial ASCII string that contains the countdown time, the group , the round and whether it is working time or
Lite Brite pegs look like LED’s don’t they? That’s what I though the other day after working on an LED cube for a few hours. I happened to see my daughter’s Lite Brite sitting there, and I looked at the pile of LED’s on my desk. What a perfect match! In this instructable I will
Lite Brite horloge à LED à l'aide d'un Arduino Continue Reading
You could always see 7-segment displays around you used to display digits, like in timer, clock, etc. In this mission, you are going to learn how it works and display numbers on it. Let’s start. Step 1: What You Will Need The parts you will need are all included in this Maker kit. SwiftIO board Shield
Affichage à 7 segments à l'Aide de Swift Langue Continue Reading
French 
English