First of all,this is my first Instructable, and I’m not a native English speaker (or writer), therefore I apologize in advance for the overall low quality . However, I hope that this tutorial can be helpful for people using a heart rate (HR) monitor system (composed by a chest strap belt transmitter and a receiver […]
After completing my GSM Home Alarm V1.0 and some time of using, I decided to make some modifications. In the hardware the main changes are the replacement of the ultrasonic sensor and the introduction of a keypad. On the software, I change the SMS notification by e-mail. Also I decided to scale down the circuit and design
An unremarked casualty of Progress is the aneroid home barometer. These days, you might still be able to find examples in the homes of people over ninety, but millions more are in the dump, or on ebay. In truth, the old-school barometer didn’t help itself by being pretty much useless at its one job. Even
I was inspired by the digital/ analog clock to make my own special clock as my second instructable. I browsed the internet and found that servo clocks are rare and binary are common. So i decided to combine the two and this is what I made. I know it looks crappy but I’m an amateur
I wanted to build a Nixie clock driven by an Arduino and found a few places on the internet, but none were 100% complete to get it working from the beginning to end. I either found bad wiring diagrams, bad code in programs or bad supporting literature that really slowed down my progress, so I
Arduino Nixie D'Horloge Et Météo De La Station De Continue Reading
My goal for this project is to make a watch with selectable dials, stopwatch and millidays. This idea started with an Aprils fools prank about metric-time. (http://www.youtube.com/watch?v=K35xG1buyFA) First I wanted to make a metric clock but soon this idea evolved from a metric watch into an open course watch. I knew that it would be
Build a unique personalised gift that’s cool and reflects the character of the recipient. What’s different about this Word Clock is that it is small enough to sit on a bedside desk, displays the recipients name and has personalised messages that appear at different times ie. Happy Birthday, Carpe Diem, Good Morning or whatever you
Personnalisé de l'Horloge de mots à l'aide d'Arduino Continue Reading
An interesting project of making a Digital Clock using Arduino UNO without the help of RTC Module. Description AIM To build a Digital Clock at Low Cost (Without using any External RTC Module) ject, I have used LCD 16X2 Display , an Arduino UNO , a 4×4 keypad and Arduino UNO v5.0 Shield to proceed
L'Horloge numérique en utilisant Arduino UNO Sans RTC module Continue Reading
This instructable will show you how to make your own arduino based watch that tells time using a matrix of LEDs. This is my first instructable, so if something is unclear leave me a comment or send a message! I was inspired by all the cool LED watches that I saw on this website: http://www.tokyoflash.com/en/watches/1/
Clock with Tics is an Arduino-powered 24-hour digital clock that displays expletives at random intervals. A clock ‘ticks’. A ‘tic’ (note the different spelling) can be a mental disorder and can manifest itself in a number of ways; most seriously, someone suffering from “Tourette’s Syndrome” will blurt out swearwords involuntarily. I had thought of titling
Horloge avec des Tics (présentation du prototype) à l'aide d'Arduino Continue Reading
French 
English