Description This project provides some lighting effect by the blinking pattern of the bulbs connected at its output. Up to 8 Bulbs can be connected in between connector CN2 to CN9 and AC power to control them should be connected at Connector CN10. DC Power should be applied at Connector CN11 in accordance with the […]
Microcontroller based running light controller Continue Reading
The AD5689R nanoDAC+™ is a dual, 16-bit, rail-to-rail, voltage output DACs. The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). The device operates from a single 2.7 V to 5.5
Introducing the SmartConnect SAM W25 module for edge nodes IoT applications Now on display at Electronica 2014, the SmartConnect SAM W25 module is the industry’s first fully-integrated FCC-certified Wi-Fi module with a standalone MCU and hardware security from a single source. The module includes Atmel’s recently-announced 2.4GHz IEEE 802.11 b/g/n Wi-Fi WINC1500, along with an Atmel | SMART SAM
The ultimate combination of an Arduino-compatible board and your day-to-day Gadget in one handheld Device. Phoenard is an All-in-one Arduino-compatible prototyping Gadget powered by an 8-bit AVR ATMEGA2560, identical to the one you find in Arduino Mega. It is essentially a pocket-sized prototyping platform which you can use as the ‘brain’ in your projects, similar
Phoenard: World’s 1st Arduino-compatible Prototyping Gadget Continue Reading
Maybe you’re learning about filters and want to see the how your filter responds in the 10Hz to 1MHz range. This guide will show you how to make a low frequency ‘spectrum analyzer with tracking generator’ using a few cheap modules and an oscilloscope — Based off of a video done by Dave Jones over
This tiny step-down converter chip measuring just 2.5 x 2.0 x 1.0 mm contains an integrated coil and can handle an output current up to 1 A. The XCL210/XCL220 are a new family of step-down micro DC/DC converters which have been specifically designed to minimize unwanted EMI emissions. This makes them particularly suited for use in small-scale RF applications. The design
New graphic chips supporting capacitive touch screens – FT801 with the “EVE” technology from company FTDI bring a simple usage even for these perspective displays. FT801 brings together advantages of the „Embedded Video Engine“ (EVE) concept and advantages of capacitive displays like easy control, interactivity and usually a higher brightness and overall vividness of these
FT801 if you prefer capacity rather than resistivity Continue Reading
Description Single Channel Relay project is a simple and convenient way to interface a relay for switching application in your project. Specifications: Input – 12 VDC @ 42 mA Output – SPDT relay Relay specification – 5 A @ 230 VAC Trigger level – 2 ~ 15 VDC Header pins for connecting power and trigger
Conversation analysts consider turns to be the most basic unit of conversation. As you would imagine, the intricacies of turn-taking have been well documented by researchers, and this process always involves the careful transcription of pre-recorded conversation. I am no expert but wanted to develop a recording tool for my own personal research. Below you
Display with a good legibility even in non-optimal light conditions is always an advantage. When we add to it a significant simplification thanks to built-in character sets and graphic functions, we get a display of the eDIP a eDIP TFT series from company Electronic Assembly. Powerful command, touch panel and a high flexibility enable to
eDIP and eDIPTFT series intelligent displays speak many languages Continue Reading
French 
English