our modern era, digital logic has become the core of all the electronics circuits either in the form of an FPGA, microcontroller, microprocessor, or discreet logic. Digital systems use many components that must be interconnected to perform the required functions. The vital element for proper operation of such a digital system is a CLOCK signal […]
Oscillators: How to generate a precise clock source Continue Reading
LED production technology currently surprises mainly on the field of white LEDs for lighting (SSL). But also color LEDs are getting still better as for the efficiency or for example in case of series Kingbright KPHCM – in miniature dimensions. Concretely series series KPHCM has standard „0805 SMD“ (2,0×1,25mm) dimensions, but unusual is it height
We have for you LED thinner than a solder drop Continue Reading
Since the release of V-USB, dozens of projects have been made that allow an AVR to communicate over USB. USB data signals are supposed to be in the range of 2.8 to 3.6V, so there are two recommended ways to have an AVR output the correct voltage. One is to supply the AVR with 3.3V
Features 3000:1 True Color PWM™ Dimming Wide Input Voltage Range: 4.5V to 110V Input and Output Current Reporting PMOS Switch Driver for PWM and Output Disconnect Internal Spread Spectrum Frequency Modulation ±2% Constant Voltage Regulation ±3% Constant Current Regulation: 0V ≤ VOUT ≤ 110V Programmable Input Current limit CTRL Inputs Linearly Adjust LED Current Adjustable
LT3795 – 110V LED Controller with Spread Spectrum Frequency Modulation Continue Reading
Every odour has its own specific pattern which our noses are able to identify. Using a combination of proteins coupled to transistors, for the first time machines are able to differentiate smells that are mirror images of each other, so called chiral molecules, something that has not been possible before. The human nose can distinguish
How does a machine smell? Better than it did Continue Reading
The TPS2378 is an IEEE802.3at (Power over Ethernet) Powered Device controller, featuring internal pass MOSFET for loads up to 25.5W, Type 1 (a.k.a. 802.3af) compatibility and auxiliary power source support. The IC is normally used together with a DC-DC step down regulator to power a network device (the PD) from a PoE compliant switch or
Edison-Scope, is an Intel Edison controlled 200 Msa/S mixed signal oscilloscope. It provides an Operating System agnostic method to control the MSO-28 oscilloscope. By leveraging the web browser on the modern smart devices, one can control USB based hardware traditionally requires a desktop OS. Conceptually this project is very similar to the PiMSO project, but
Nano-electronics research center imec announced today that it has improved its large area n-type PERT (passivated emitter, rear totally diffused) crystalline silicon (Si) solar cell on 6″ commercially available n-type Cz-Si wafers, now reaching a top conversion efficiency of 22.02 percent (calibrated at ISE CalLab). This is the highest efficiency achieved for this type of
Description: The TLF4277-2 is the ideal companion IC to supply active antennas for car infotainment applications. The adjustable output voltage makes the TLF4277-2 capable of supplying the majority of standard active antennas such as: • FM/AM • DAB • XM • SIRIUS The TLF4277-2 is a monolithic integrated low drop out voltage regulator capable of
Features 8 × 1A Buck Power Stages Configurable as 2, 3 or 4 Output Channels 8 Unique Output Configurations (1A to 4A Per Channel) Independent VIN Supplies for Each DC/DC (2.25V to 5.5V) Low Total No Load Supply Current: 15μA In Shutdown (All Channels Off) 68μA One Channel Active in Burst Mode® Operation 18μA Per Additional
LTC3371 – 4-Channel 8A Configurable Buck DC/DCs with Watchdog and Power-On Reset Continue Reading
French 
English