Today I made a high frequency multiplier using a single component: the ICS501 PLL clock multiplier IC. This chip provides 2x, 5x, 8x (and more) clock multiplication using an internal phased-lock loop (PLL). At less than a dollar on eBay, $1.55 on mouser, and $0.67 on Digikey, they don’t break the bank and I’m glad I have a few in my […]
With the host of protocols available in electronics interfaces, choosing a protocol is a hard job. Some protocols are designed for long distance and reliable communication applications such as RS-485. Others are used for low cost and short range communication such as I2C, and so on. The backbone car’s network is the Controller Area Network
LIN Protocol — One Wire Protocol for Automotive Applications Continue Reading
Have you been on the lookout for a deeply embedded board capable of rendering good quality HMI interfaces with the capabilities you normally find on microcontrollers? You may want to take a look at the new STM32H7 series of MCU’s, as they are the industry’s first ARM Cortex-M7 core with embedded Flash memory, running at a
Description 8 Channel Relay Board provides an easy and practical method to connect 8 relays for switching purposes in your project. Voltage level support for both TTL and CMOS is provided by the input. Simple interface for projects using Microcontrollers and analog circuits. Specifications: Input supply 12 VDC @ 336 mA Output eight SPDT relay
The Soundlazer directional audio project is the follow-up to my initial and highly successful project on Kickstarter. During my efforts to reduce the price of this incredible technology, I created the Soundlazer “Snap” to enable supporters to discover fresh options in directional audio. Directional speaker systems such as the Soundlazer are known as parametric speakers.
Soundlazer SNAP – The Directional Parametric Speaker Continue Reading
Here we introduced one OV7670 camera module just purchased online, including the communication of camera module and Arduino UNO, the using ways to take photo via camera module, and so on. This is an Arduino camera module, adopted the Surveillance cameras digital image processing chip-OV0706, specially designed for image acquisition and processing application, based on TTL
Hi guys, welcome to this tutorial. Today, we will build an mp3 player using an Arduino and the DFPlayer mini MP3 module. The DFplayer mini is a compact and affordable mp3 module with a basic audio output that can be easily linked to a speaker or headphones. The module can operate independently with a connected
Rotary encoders with built-in buttons are excellent input devices for projects, particularly if you need to navigate menus and make selections. With any luck, this Instructable will empower you to experiment with a simple menu system and pair it with a rotary encoder to elevate the professionalism of your upcoming project! The reason why menus
Step 1: HOW IT WORKS The operation of a project is uncomplicated. Understanding it is crucial for project development. Essentially, the device includes a reed switch or magnetic switch attached to the bicycle frame and a magnet attached to one of the spokes. The magnet activates the switch with each turn of the wheel. The
Every serious maker out there will surely tell you the importance of having a good oscilloscope. An oscilloscope is something you should have if you really consider yourself a maker, and fortunately enough, the cost of quality oscilloscope has been on the decline for some time now, so you don’t necessarily have to get the
TOP 5 PC-BASED OSCILLOSCOPES FOR THINKERS AND MAKERS Continue Reading
French 
English