This instructable will be about using arduino to control the revell vexplorer. Later you can add as many sensors you want. If you don’t have most of the parts already this will cost you about $200 dollars. Most of the electronic bits you can find at radioshack and vexplorer at amazon, also arduino at the […]
Comment programmer le Vexplorer l'Aide d'Arduino Continue Reading
This page explains how to build an RFID reader with just an Arduino (Nano 3.0 was used in testing, but other models may be compatible), a wire coil made by hand, and various affordable common components. Credits The hardware and software designs for this project are based in part on the ideas, code and schematics
BRICOLAGE FSK Lecteur RFID à l'aide d'Arduino Continue Reading
1. Introduction As the portable electronics industry has advanced over the years, various requirements have emerged, including longer battery life, smaller and more affordable systems, brighter full-color displays, and increased talk time for cellular phones. The growing demand for power systems has made power consumption a critical concern. To meet these demands, engineers have focused
This project is designed to help you construct some relay boxes for controlling power from your wall socket using an arduino or microcontroller. The inspiration for writing an instructable came when I decided to build some relay boxes for my personal Garduino project. For safety concerns I started designing my own relay circuit and outlet until I came
Hi. I’ve just got myself an Arduino Uno R3 and I’m really new in the world of Arduinos. There’s so much to learn and explore 🙂 One of the first shields that I’m tempted to buy is the Prototype Shield. I think building a prototype circuit right on top of the Arduino is pretty slick.
This tutorial will show you how to create a garment that changes its behavior depending on how conductive you are. It detects conductivity through iron-on conductive fabric that we will use, and it will light up and sing different notes depending on how you touch the conductive fabric. We’ll be using sewable electronics (the LilyPad
In this Instructable, we’re going to be making a Tic Tac Toe or Noughts and Crosses shield for an Arduino that allows you to play against another person or an AI player running on the Arduino. The game board is made up of a 3×3 grid of RGB LEDs that light up green or blue
Arduino Tic Tac Toe Bouclier Avec une IA adverse Continue Reading
I love my Arduino. It got me into, and hooked on, microcontroller programming. I also like the expandability that shields provide. My Arduino can be a GPS Locator one minute, and be connected to the web the next. There’s also a kit that lets you make your own shields. That last option always bothered me.
Arduino ProtoShield à partir d'Articles de Ménage Continue Reading
This project emulates a trumpet by playing notes using the three buttons (valves). This is easy to make and fun to play with, though it can only play one octave and no sharps/flats. Step 1: Code Load this into your Arduino: int speaker = 9; // Hook up speaker to digital pin 9 int sw1
The Twittering office chair “tweets” (posts a Twitter update) upon the detection of natural gas such as that produced by human flatulence. This is part of my commitment to accurately document and share my life as it happens. For more in depth theory, please see the next step entitled Theory. See the results of the
Le Gazouillis Chaise de Bureau à l'aide d'Arduino Continue Reading
French 
English