This instructable shows how you can use many openly available projects together to build an interesting and complex system. It draws on several community projects including: RepRap, Arduino, Processing, Linux and, of course, Instructables! More specifically this intructable shows how to draw the path of a bouncing ball with a CNC machine. But this is […]
Le contrôle d'un RepStrap avec Traitement à l'aide d'arduino Continue Reading
Chapter 1: Introduction 1.1. Nails, Nail making and nail making machine 1.1.1 Nails Nails, slender pin-shaped objects crafted from hard metal or alloy, serve as fasteners in various applications. Typically composed of steel, they are often treated with coatings to resist corrosion in harsh environments or enhance adhesion, thereby improving both functionality and appearance. Nails
I designed a CNC Arduino Plant Watering machine for my local high school science and engineering fair. I ended up getting second place in the maths and engineering category, won $200 from the Missouri Society of Engineers, and was invited to compete in an international science fair in New York. With all that said this
CNC Arduino Croissance des Végétaux Machine Continue Reading
I’ve seen a number of tutorials about how to build the platform for a 3-axis CNC milling machine. I have not seen anyone tackle the tricky subject of the electronics. Here now is my attempt to do so. Step 1: Parts You’ll need: – an arduino. I chose duemilanova. (depends on the board you get)
Comment câbler un arduino basée sur 3 axes CNC de la machine à l'aide d'arduino Continue Reading
This project uses just three main components to provide forward and reverse control for a single motor. You can easily interface it to an Arduino or any other microcontroller. It’s so simple – you can wire it up “free-form” without a circuit board in about 15 minutes. Features: All parts available at Radio Shack for
I came across a bunch of stepper motors and I have since been looking for a project to do with the kids. An old Telecran (French for Etch-a-Sketch) later, we are in business ! What I used for this project: – an Arduino Uno – 2 stepper motors – 2 easydrivers v44 (by www.sparkfun.com) –
Telecran (Etch a Sketch) + Arduino = Telecranduino ! à l'aide d'arduino Continue Reading
Here is how to make a Stereolithography 3D Printer. It is still a bit of a work in progress but so far it is working pretty well. This is mainly an experiment which started as a Delta Robot Stereolithography Printer but ended as a more traditional Cartesian Stereolithography Printer. Stereolithography (SL or SLA from Stereolithography
Construire un Laser Imprimante 3D – Stéréo à la Maison à l'aide d'arduino Continue Reading
Background In this blogpost we’re going to deal with the Compass Module 3-Axis HMC5883L from Parallax and how to integrate it into an Arduino. The Compass Module 3-Axis HMC5883L is designed for low-field magnetic sensing with a digital interface. This compact sensor fits into small projects such as UAVs and robot navigation systems. The sensor
One of the goals of Movable Party is to provide an interactive experience for audiences/participants. Since power will be generated from a hub motor attached to the rear wheel of each bike (see this post), the speed of the rear wheel directly translates to the amount of power generated. Detecting how fast the rear wheel
I have watched the availability of high power (>10W) LED’s jump over the past year or so and… drop in price. I came across some very inexpensive 10W white LED’s from Deal Extreme that were in the $3 dollar range and put out 900lumens, which is more than a 60W incandescent bulb. I immediately thought
Construire l'Ultime Larson Scanner! à l'aide d'arduino Continue Reading
French 
English