Comment faire de poing de pompage avec LED animation à l'aide d'Arduino

It’s to make a fist pumping LED controller. What is it? Have you noticed yourself fist pumping to the music at a party or a club? That’s exactly for that. You would wear a band with a accelerometer/gyro mounted. As you move your hand around the air, the movement will trigger a light board and create different LED patterns based on the position of your hand. This will be a fun project.

Step 1: What you need

Supplies

. Materials for circuit
– ArduIMU sensor board
– Arduino Board
– Arduino Software (http://www.arduino.cc/)
– TLC 5940 LED Driver(4)
– 8X8 prototype board
– Bread board
– Battery
– Super bright LEDs(64)
– Solder
– Stranded wire
. for a band & a back-pack
  – A back-pack(any back-pack what you have)
– Felt (for a band)
– Thread
– Velcro
– Rhinestones(option)

. Tools
  – Soldering iron
– Pliers
– Wire strippers
– Wire snippers
– Scissors
– Needle
– Fabric glue(option)

Step 2: Prototyping for LED animation

1. You can prepare your animation patterns with Adobe Illustrator to create an animated GIF (to make sure that how works) (you can use the one we’ve prepared below)
2. Write Arduino code using the TLC4590 Libraries to create LED patterns based on the pixel animation
(You can download the Arduino code for the animation.)

Step 3: Create LED circuit

1. Use the TLC Arduino tutorial (http://www.arduino.cc/playground/Learning/TLC5940) to connect the circuit. This circuit uses the TLC 5940 LED driver, which allows you to fade LED’s as well as switching them on and off.

2.You can use 16 LED’s on one TLC 5940 driver and chain more drivers together.  This project uses 4 TCL 5940’s and 64 Superbright LED’s.

3. Testing; to make sure if the circuit is configured correctly run BasicUse code in Arduino playground TLC 5940 library examples. The example uses two TLC 5940 drivers.

For more detail: Comment faire de poing de pompage avec LED animation à l'aide d'Arduino