DIY IKEA Wireless Qi Charging for the Hexiwear

The Achilles Heel of the Mikroelektronika Hexiwear is its charging: the charging and USB connector are only designed for a limited number of plug-unplug cycles, and it does not have a wireless charging capability like the Apple iWatch. Until now! I have built a DIY wireless charging system for the Hexiwear ? :

Wireless Qi Charging? IKEA!!!!DIY IKEA Wireless Qi Charging for the Hexiwear

I have been experimenting with wireless charing for a few weeks, including building a Qi charging station using a kit from Adafruit (see “Qi Wireless Charging Transmitter with 3D Printed Enclosure“). The problem is that getting Qi charging receivers seems not to be that simple. With my research I have found that the Apple iWatch is using Qi technology, but they tweaked it in a way that it only works with the Apple chargers/receivers (see “Apple tweaked the Qi charging standard so that Apple Watch only works with its own chargers“). Interestingly, the furniture company IKEA is selling Qi transmitters and receivers (http://www.ikea.com/us/en/catalog/categories/departments/wireless_charging/). To my surprise, when I visited a nearby IKEA store yesterday, the older iPhone and Samsung Galaxy S4 (VITAHULT) Qi receivers were on sale for CHF 0.95 (about US$1): what could be wrong with buying a few of them? At this point, I should probably mention the ‘rolling eyes’ of my wife ;-).

Opening

The question is: can I use these for my projects? So I decided to open up the wireless phone cover. The cover has to plastic parts, and with a bit tweaking I was able to separate them. Insider there is the battery connector, the receiver circuit and the charging coil under a black FFDM (Flux Field Directional Material):

The FFDM is a high magnetic permeability and low energy loss material which enhances the power transfer efficiency. The FFDM can be easily removed. Under the FFDM there is the receiver coil:

Removing Coil

The coil is glued to the plastic cover with a double side adhesive tape. I used a tooth pick to carefully lift it up:

Read more: DIY IKEA Wireless Qi Charging for the Hexiwear


A Propos De L'Auteur

Ibrar Ayyub

Je suis expérimenté, rédacteur technique, titulaire d'une Maîtrise en informatique de BZU Multan, Pakistan à l'Université. Avec un arrière-plan couvrant diverses industries, notamment en matière de domotique et de l'ingénierie, j'ai perfectionné mes compétences dans la rédaction claire et concise du contenu. Compétent en tirant parti de l'infographie et des diagrammes, je m'efforce de simplifier des concepts complexes pour les lecteurs. Ma force réside dans une recherche approfondie et de présenter l'information de façon structurée et logique format.

Suivez-Nous:
LinkedinTwitter

Laisser un Commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

fr_FRFrench
Faire défiler vers le Haut