This is my instructable on charlieplexing a LED row/string with the arduino. I noticed that there weren’t many instructables on charlieplexing using an arduino, so i made this. I tried to keep the project simple, but that didn’t work very well. The soldering is complex, I wouldn’t recommend this as a first time soldering project.
Here’s some background on charlieplexing: en.wikipedia.org/wiki/Charlieplexing
I took about 80 pictures & not all of them made it into the main steps, but you can find them in step 9: Extra Pictures
If you have any comments, questions &/or suggestions please ask them!
Step 2: Solder the anodes of the LED’s
There’s not much to say about the next few steps, but there’s a few main points I’ll mention.
– The LED’s anodes are soldered in groups of 3
– Make sure the 4 groups don’t get joined together, but stay separate
The wires that connect the 4 groups are kind of shaped like a L.
Step 3: Bend the Cathodes
Main Points:
– You should end up with 4 different rows
– Make sure each of the the 4 rows contain only 3 connections to the cathodes & only one from each group of LED
Parts List:
Parts:
– 12 LED’s; I’m using some 3 mm Red LED’s
– 4, 270 Ohm resistors; You can use other values as well
– Perfboard/Veroboard; I used a piece 27 holes x 5 holes
– Wire; I used some 26 gauge, solid core wire
– Header pins (optional)
– Arduino
Tools:
– Soldering Iron
– Hot glue gun (optional)
– Helping hand (optional)
For more detail: Charlieplexed rangée de lumières de LED, pour l'Arduino
French 
English