Arduino Message De Clavier À Code

When the button is pressed in this example, a text string is sent to the computer as keyboard input. The string reports the number of times the button has been pressed. Once you have the Leonardo programmed and wired up, open up your favourite text editor to see the results.

NB: When you use the Keyboard.print() command, the Arduino takes over your computer’s keyboard! To insure you don’t lose control of your computer while running a sketch with this function, make sure to set up a reliable control system before you call Keyboard.print(). This sketch includes a pushbutton to toggle the keyboard, so that it only runs after the button is pressed.

Software Required

• Any text editor

Schematic:

Code

/*
Keyboard Button test

For the Arduino Leonardo and Micro.

Sends a text string when a button is pressed.

The circuit:
* pushbutton attached from pin 2 to +5V
* 10-kilohm resistor attached from pin 4 to ground

created 24 Oct 2011
modified 27 Mar 2012
by Tom Igoe

This example code is in the public domain.

http://www.arduino.cc/en/Tutorial/KeyboardButton
*/

For more detail: Arduino Message De Clavier À Code