Story
We love our workshop, but it has one downside (or maybe upside) – a large flight of stairs to the gallery. We constantly need to move parts and components between one floor and the other, so we’ve been plotting different ideas: drones, dogs, carrier pigeons and what not, and then it hit us! A lift!
Since we recently added HC-05 Bluetooth Module to circuito.io, we decided to try it out in this project.
Here’s a short video that shows how it works. Pretty neat huh?
Let’s start building!
1. Setting up
Start by making sure you have all the parts you need. There’s a list above that includes all the components for the project.
Then, go to the circuito.io builder.
As you can see, the parts for this project are already pre-selected. You can change them if you need to – for example, if you have Arduino Micro instead of Uno, or if you want to use a different motor, and then click on Generate and you’ll see all the information you need.
2. Wiring
Scroll down after the list of components, and you’ll see a step-by-step wiring guide. Click on “next step” and “previous step” to browse between steps.
Looking at the circuit, we can see the two main components: Bluetooth and Stepper.
Connecting the Bluetooth
The HC-05 Bluetooth module has only 4 pins we’ll need to connect: TX, RX, GND and VCC. Technically you can connect them directly to the Arduino. We use a breadboard so that we can add more components.
French 
English