Color LCD Shield




Color LCD Shield description:

Includes the Nokia 6100 128×128 mini color LCD and a backlight driver circuit that boosts to 7V, and three momentary push-buttons tied through jumpers to pins D3, D4, and D5.

Color LCD Shield




Color LCD Shield specification:

Color LCD Shield pinout:

Color LCD ShieldNote:
The Nokia 6100 LCD is controlled through a 9-bit SPI interface. The control pins of the LCD are connected to the hardware SPI pins of the Arduino D13/SCK, D11/DIO), the CS pin is tied to D9 and the reset pin is connected to D8. Voltage from the ‘5V’ pin of the Arduino is boosted to 7V to power the LCD backlight.

 

For more detail: Color LCD Shield




This Post / Project can also be found using search terms:

  • arduino color lcd shield
READ  CAN-Bus Shield

Leave a Comment

*
= 3 + 5

(Spamcheck Enabled)

Read previous post:
CAN-Bus Shield

CAN-Bus Shield description: This shield gives the Arduino CAN-Bus capability for communication with vehicle engine management systems. It uses the...

Close
Scroll to top