12W Audio Amplifier




Project is built around TDA2006 PENTAWATT package. TDA2006 provide high output current and has very low harmonic cross-over distortion. Further the device incorporate- rates an original (and patented) short circuit protection system comprising an arrangement for automatically limiting the dissipated power so as to keep the working point of the output transistors within their safe operating area. A conventional thermal shutdown system is also included. The TDA2006 is pin to pin equivalent to the TDA2030.

12W Audio Amplifier




Specifications:

18V 2amps Single Supply
Power supply up to 18 VDC
Output power 12 W @ 4 Ω, 8 W @ 8 Ω
TDA2006 provides high output current
Has very low harmonic and cross-over distortion
Short circuit protection/Thermal shutdown system in IC
Terminal pins for connecting audio signal input
Header connector for connecting potentiometer (POT) for volume adjustment
Screw terminal connector for easy power supply input and speaker connection
Power-On LED indicator
Heatsink for IC
Four mounting holes of 3.2 mm each with nut and stud
PCB dimensions 51 mm x 63 mm

 

For more detail: 12W Audio Amplifier




This Post / Project can also be found using search terms:

  • heatsink pentawatt
READ  Make high-quality double-sided PCBs – at home

Leave a Comment

*
= 3 + 8

(Spamcheck Enabled)

Read previous post:
Arduino foot switch
Use foot switch to open Linux terminal using an Arduino

So here is how i made my foot pedal used to start Linux terminal using an Arduino. It's made because...

Close
Scroll to top