Buck controller allows 48V to 1V direct step-down

Key Features Wide input voltage range: 4.5V to 60V Wide output voltage range: 0.6V to 54V Light-load efficiency enhancement Low ripple diode emulation mode with pulse skipping Programmable soft-start Supports prebiased output with SR soft-start Programmable frequency: 100kHz to 2MHz External sync PGOOD indicator Forced PWM Adaptive shoot-through protection No external current sense resistor Use lower MOSFET ...

Read more

LT8616 – Dual 42V Synchronous Monolithic Step-Down Regulator with 6.5μA Quiescent Current

Features Wide Input Voltage Range: 3.4V to 42V 2.5A and 1.5A Buck Regulators with Separate Inputs Fast Minimum Switch On-Time: 35ns Ultralow Quiescent Current Burst Mode® Operation: 6.5μA IQ Regulating 12VIN to 5VOUT and 3.3VOUT Output Ripple < 15mV 180° Out of Phase Switching Adjustable and Synchronizable: 200kHz to 3MHz Accurate 1V Enable Pin Thresholds Internal Compensation Output Soft-Start and Track ...

Read more

Intersil shrinks step-down DC/DC power module

Encapsulated in a tiny 9.0×6.5×1.83-mm QFN package, the ISL8203M step-down DC/DC power module from Intersil furnishes an adjustable output voltage between 0.8 V to 5 V to allow designers to use one device to build a single 6-A or dual 3-A output power supply. The ISL8203M simplifies power-supply design for FPGAs, ASICs, microprocessors, DSPs, and other point-of-load conversions in communications, test and m ...

Read more

LTM4625 – 20VIN, 5A Step-Down DC/DC μModule (Power Module) Regulator

Features Complete Solution in <1cm2 (Single-Sided PCB) or 0.5cm2 (Dual-Sided PCB) Wide Input Voltage Range: 4V to 20V Input Voltage Down to 2.375V with External Bias 0.6V to 5.5V Output Voltage 5A DC Output Current ±1.5% Maximum Total DC Output Voltage Error Over Line, Load and Temperature Current Mode Control, Fast Transient Response External Frequency Synchronization Multiphase Parallel Current Sharing ...

Read more
Scroll to top