This post starts a small (or larger?) series of tutorials using the Arduino Motor/Stepper/Servo Shield with the FRDM-KL25Z board. That motor shield is probably one of the most versatile on the market, and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project […]
Tutorial: Arduino Motor/Stepper/Servo Shield – Part 1: Servos Continue Reading
This Instructable is all about one of life’s simple actions, flipping a light switch on and off. At oomlout we do it many times a day, so many in fact it came to a point where we asked ourselves “Can’t we get an Arduino to do this?”. Of course we can, what follows is how
Easy DIY Home Automation (using servo switches) using arduino Continue Reading
In this instructurable I will expalin and show you how to make a Parallax servo rotate 360º. And againI have search the internet to see tutorials clear enough to make this posible with no luck. Don’t get me wrong they are some how good but not clear. This mod will help you to use the mod servo
Servo 360 rotation mod (Parallax) Continue Reading
*Check back for more updates on this build 🙂 So, have you heard of the Omnibot? Well! Any kid from the 80’s will remember how amazing this robot was. For you young kids, this robot was released in the early 80’s by Tomy. The robot was “programmable”, in the sense that the actions were recorded
DIY Mod an Omnibot 80’s Robot with Voice, Camera, Servos, Bluetooth Continue Reading
In arduino projects, you might add servo to your projects. This short tutorial, show you the basic how arduino and servo works together. Instruction; 1) Connect all jumper wire as shown in diagram. 2) Connect the signal wire from servo to digital pin 9. Upload this code to your arduino /* Servo Basic Understanding the basic of servo in arduino projects. Sweep
Arduino Servo Basic Code Continue Reading
