Robotic fish is a biomimicking of a real-world fish being developed with a view to enable surface level cleaning of water bodies. Introduction Robotic fish is a biomimicking of a real-world fish being developed with a view to enable surface level cleaning of water bodies. The fish monitors the pH levels of the water that […]
PATROL FISH TO COLLECT AND CHECK THE CONTAMINATION OF A WATER BODY Continue Reading
Introduction / Why this project In 2016 I build my first fish feeder, see Fish Feeder 1. The feeder worked fine for more then half a year. After that period the servos were worn out, causing the program to halt, without sending an error-mail. Oops. I didn’t had the time to correct this fault, because the aquarium
Fish Feeder 2 Continue Reading
Step 1: Prepare Your Materials For this project, you will need the following materials: For the circuit: 3 pieces of Insulated copper wire (22AWG wire) around 4-6 inches long, stripped on both ends AC/DC Adaptor GWS Mini Servo Double Side Servo arm Servo screw (1.7 x 3mm) Arduino USB Cable A to B For building
Acrylic Fish Feeder Continue Reading
I’m setting up a betta fish tank and wanted to make an automatic fish feeder so he never misses a meal. I’ve seen other DIY fish feeders that just shake a container but I wanted to be able to precisely control how much food he’ll get. Hope the new fishy likes it! Follow my other
Betta Fish Feeder Continue Reading
Assembly instructions for an add-on board for the Arduino. **** FOR INSTRUCTIONS FOR MARCH 2013, KICKSTARTER PROJECT GO HERE http://www.instructables.com/id/Blinky-Fish-Kickstarter-Project/ ************ It has some LED’s and a button. It connects to digital pins 9-13 and ground. My hope is that this will be useful to people that want to play with writing code for the Arduino, but don’t want
Blinky Fish using an Arduino Continue Reading
