This is a simple solar tracker which automatically orients itself towards the sun or any bright source of light like the sun .If you place solar panels on this robot it can increase their productivity by 90 to 95 %. At first creating a solar tracking robot may sound complicated but it quite quickly becomes […]
Arduino Solar Tracking Robot Continue Reading
In part 1 of our Arduino tutorial seres we covered the basics of how the Arduino works, and we’re going to use that knowledge in a hands-on project and see how this open-source hardware programming environment works when we’re actually trying to get something done with it. After this, you’ll have more than enough information
Arduino hardware hacking: Part 2 Continue Reading
I was inspired by Frits Lyneborg’s Yellow Drum Machine. Watching the videos, it has such personality! I have also been thinking recently about sound and robotics. I did some research looking for a version of the robot that used the Arduino as a brain, but couldn’t find one that seemed so responsive and alive as
The Revenge of the Yellow Drum Machine (Arduino) Continue Reading
I created this Theremin like device after seeing this article in Make magazine: http://m-cdn.dashdigital.com/make/vol15/?pg=69#pg67 While this looked pretty straight forward it turned out to be a bit much for me at the time. But after much effort, I got it to work pretty good. I had trouble getting the laser to aim correctly so I
Theremin with Zapper,laser,Arduino Continue Reading
After participating to Codemotion Rome last month, from the 9th of May we’ll be spending a couple of days at Codemotion Berlin, an innovative tech event engaging developers of all languages and technologies. We’re having an Arduino wearables workshop organized together with Kobakant duo (Mika Satomi and Hannah Perner-Wilson) and focused on the use of Lilypad. In
Arduino meets Wearables workshop at Codemotion Berlin Continue Reading
Arduino is cool. It’s cool because it’s a tiny device – about three inches by two inches – that comes with a USB port and a programmable chip. It’s cool because you can program it using a very simple programming language known as Wiring. But most of all, it’s cool because the entire reference design
Arduino hardware hacking: Part 1 Continue Reading
This instructable will show you how to make an RC launch system for your Estes rocket, which can be operated with a TV remote. What it does is it allows you to press the center button on your TV remote, and it’ll automatically launch your rocket. In this way it is basically a wireless version
How To Make An RC Rocket Launch System Continue Reading
A quick introduction to the Arduino Arduino is an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. It’s intended for artists, designers, hobbyists, and anyone interested in creating interactive objects or environments. Arduino can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling
Controlling your trains with an Arduino Continue Reading
This book describes how to build and program an Arduino-controlled machine for drawing algorithmic compositions on walls with a marker. The mechanism consists of two stepper motors with spools attached; the motors are attached to either side of the drawing area and a marker is suspended between them attached to fishing line. The motors pull
Make an Arduino-Controlled Drawbot by Shawn Wallace E-Book Continue Reading
Throwies are great. They have a minimal parts count – 2 or 3 depending on whether you use a magnet – and produce a great effect. They are very cheap and easy but not highly efficient: 1) They are on all the time, so on average they waste half of their energy shining during the
Throwduino Basic – Light-Sensing Flashing Throwie Continue Reading
