16-Channel High-Current Driver Shield

16-Channel High-Current Driver Shield description: Sixteen high current driver channels, each capable of sourcing 5A @ 30V. Over-temperature, over-voltage, and over-current protection is included on all channels. Shift register controls allows the shield to use only four pins and the shiftOut() library function. An expansion connector allows up to 25 shields to be daisy chained for as many as 400 channels. ...

Read more

Triple-Wide Extender Shield

Triple-Wide Extender Shield description: Plug in an Arduino to the underside and it replicates all of the pins in three locations so you can istall multiple shields side-by-side. The pin replicators keep everything connected. Triple-Wide Extender Shield specification: 6.3in tall x 2.7in wide 162mm tall x 69mm wide Arduino and Illuminato replicated mounting holes Arduino and Illuminato replicated plated thro ...

Read more

Triangle Extenders

Triangle Extenders description: Triangular shaped wedges to rotate other shields 45 degrees off the Arduino. Triangle Extenders specification: 1.77×1.15 inches 142mm x 30mm PCB only Arduino replicated mounting holes for left and right Arduino replicated plated through-hole headers for left and right Triangle Extenders pinout: Note: No pins used, purely mechanical.   For more detail: Triangle Extenders ...

Read more

TouchShield Stealth

TouchShield Stealth description: This is the Stealth Edition, which has an all-blacked out board that looks pretty slick on top of the dark blue Arduino. It’s also higher quality, machine soldered and assembled, with a few internal trace re-routes to make it a little lighter, faster, and power-redundant. TouchShield Stealth specification: 128×128 OLED Screen 262K Colors Touch Screen Powered from the Arduino ...

Read more

TouchShield Slide

TouchShield Slide description: After talking with several TouchShield Stealth users, I decided to build a bigger and more powerful option, for the folks who want that extra capacity. The TouchShield Slide is a widescreen option that makes full use of the space on the Arduino, maximizing screen space. With 340×240 resolution and a resistive touchscreen, the Slide offers clear, precise viewing and tactile sen ...

Read more

Tank Shield

Tank Shield description: The TankShield has dual motors which are controlled by the Arduino through serial commands, and can run from a Lithium Backpack. Tank Shield specification: Dual independent rear wheel drive Dual brushed motors anchored underneath Dual 20-link black tank treads Adjustable tension on front and back wheels Solid metal front axle with dual non-threaded stop-locker nuts to prevent axle d ...

Read more

Mega Lithium Backpack

Mega Lithium Backpack description: Shield-format battery pack and charger circuit that fits either under or over an Arduino Mega. Includes prototyping area. Mega Lithium Backpack specification: Bare battery PCB matches the size of the Arduino Extended easy-soldering prototyping space High Capacity 2200mAh Lithium Ion Battery (29 Standby Arduino Hours) Medium Capacity 1000mAh Lithium Ion Battery (15 Standby ...

Read more

Lithium Backpack

Lithium Backpack description: Shield-format battery pack and charger circuit that fits either under or over an Arduino. Lithium Backpack specification:   Lithium Backpack pinout:   For more detail: Lithium Backpack ...

Read more

Input Shield

Input Shield description: The InputShield provides a joy stick, two buttons, and vibration motor. Input Shield specification: 1 Joy Stick 2 Buttons 1 Vibration Motor 2 Operating Modes Pass-through signal header Fits squarely on top of Arduino See wiki for additional details and a data sheet Input Shield input: Note: The InputShield has two operating modes. Pin usage is switchable between: Mode A: D4, D5, D6 ...

Read more

GeoShield

GeoShield description: The GeoShield integrates a GPS module, digital compass, and 3-axis accelerometer all onto the one shield. GeoShield specification: System Specifications Arduino shield form factor 3.3V – 5V operation 5V tolerant I/O Forward sensor data to any Arduino pins Accelerometer Specifications High-sensitivity accelerometer Filtered output for fast, accurate readings Tuned for up to 1.5G accele ...

Read more

Double-Wide Extender Shield

Double-Wide Extender Shield description: Plug in an Arduino to the underside and it replicates all of the pins in two locations so you can istall multiple shields side-by-side. The pin replicators keep everything connected. Double-Wide Extender Shield specification: 4.2in tall x 2.7in wide 108mm tall x 69mm wide Arduino replicated mounting holes Arduino replicated plated through-holes Solderable dev area Do ...

Read more

Double-Tall Extender Shield

Double-Tall Extender Shield description: Plug in an Arduino to the underside and it replicates all of the pins in two locations so you can istall multiple shields end-to-end. The pin replicators keep everything connected. Double-Tall Extender Shield specification: 5.6in tall x 2.0in wide 142mm tall x 51mm wide Arduino replicated mounting holes Arduino replicated plated through-holes Solderable dev area Doub ...

Read more

Use Arduino for Projects is Stephen Fry proof thanks to caching by WP Super Cache

Scroll to top