RFduino Compass




Step 1: Material Needed

While other combinations of materials may be used, the ones used for this project and shown here are:

  • RFD22102 RFduino DIP BLE & ARM CPU
  • RFD22121 USB Shield
  • RFD22128 CR2032 Coin Battery Shield (Optional)
  • LSM303 (such as Adafruit ID: 1120)
  • OLED Display (such as Adafruit ID:938)
  • Mini-Breadboard
  • Solderless Breadboard Wires

RFduino Compass




Step 2: Setting Up the Software

  1. Install the Arduino and RFduino software following the instructions found here: http://www.arduino.cc/en/Main/Software and here: http://www.arduino.cc/en/Main/Software
  2. Download the Compass sketch and supporting libraries from https://github.com/RFduino/RFduinoApps
  3. Use the Arduino IDE to install the sketch on the RFduino.

 

For more detail: RFduino Compass




Clip to Evernote

Leave a Comment

(Spamcheck Enabled)

Read previous post:
How to build an Arduino energy monitor – measuring mains voltage and current

This guide details how to build a simple electricity energy monitor on that can be used to measure how much...

Close
Scroll to top