Ever wanted a box that opens in a super cool way? We thought it would be fun to create a box that can be unlocked using the correct fingerprint! If we had more time, we would make the box more secure. In the mean time, we have learned a lot and had a lot of […]
DIY Fingerprint Lock Box Continue Reading
Do you need a way to quickly and easily set a timer for short intervals? This audio and visual timer has you covered! All you need to do to set your timer is turn the potentiometer knob and push the button. One LED = 5 seconds Two LEDs = 10 seconds Three LEDs = 20
Audio and Visual Timer Continue Reading
So this is the Nanoleaf 2.0 which is a DIY version of the famous Nanoleaf RGB Triangular lighting setup. The goal here was to Recreate a Nanoleaf-like device with minimal spec and low cost, one that has all the basic RGB Glowing features and can be made easily. To accomplish this feat, I prepared this
Introducing GetFit, your ultimate health and workout partner. GetFit is an easy-to-use, teachable fitness tracker with the capability of detecting an endless variety of exercises. Powered by Arduino Nano 33 BLE Sense and Edge Impulse, it is a completely open-source project. Features Can Count unlimited exercises Fully open-source Teachable Rechargeable Calorie Burn Estimation on a
DIY Fitness Tracker(GET-FIT) Continue Reading
I’m working together with my wife. But sometimes one of us has an external appointment. So, if one of us is thinking about the other, we want to show it together. For this, I have made an Love Gauge for us. It stands on our desktop, or you can carry it somewhere else, cause it
Love Gauge Using Arduino Continue Reading
I always wanted an old traffic signal and finally got one recently. However, it was very simply wired so that all the lights were fixed on. What fun is that? I also wanted to try out an Arduino controller and thought this would be a nice simple project to incorporate it into. This Instructable will
Traffic Signal / Stop Light Wiring with Arduino Controller Continue Reading
You must have seen many magic tricks and wondered how it works so, here’s another one but you don’t have to figure out how it works. I will show how it works (Spoiler – It uses magnets and some electronics) and how you can make one yourself. This magic Spinning Top rotates forever and you
Pseudo Perpetual Spinning Top Continue Reading
“Marblevator, Pertual?, Cradle” like “Marblevator, Perpetual?, Version 2” and “Marblevator, Perpetual?” is not perpetual at all as it is simply another illusion. And like its predecessors it is a very quiet illusion with the only noise being that of the marble as it rolls back and forth in the cradle. I’ve incorporated an Arduino Nano
Marblevator, Perpetual?, Cradle. Continue Reading
An affordable Arduino Turntable designed for Time lapse photography. Changing the gearing and code it can also be used for Photogrammetry/3D scanning or Video. The turntable operates on the move shoot move principle in the Timelapse and Photogrammetry modes where the camera is triggered via the sync cable. The electronics can be adjusted based on
3D Printed Timelapse/3D Scanning Turntable Continue Reading
Now forgive my memory, as this was a few years back now. What started out as a children’s spaceship themed bed, turned into an epic build. Supplies The project started with the purchase of a single mattress. I then walked around the local DIY store and started to find shapes that I thought I could
Starship X582 Incursion Starfighter Childrens Interactive Bed Continue Reading
