LED Projects

RGB LED Grid 2

RGB LED Grid

This project involved creating a red, blue, green (RGB) light emitting diode (LED) matrix that displayed the colors of the rainbow. The colors of the rainbow were chosen to show the full color spectrum that the LEDs are capable of, while still giving distinct variation within the LED matrix. In this project, each diagonal of […]

RGB LED Grid Continue Reading

Arduino Mood Light Project

Smart Phone Controlled Arduino Mood Light with Alarm

Smart Phone Controlled Arduino Mood Light with Alarm I recently purchased the Neo Pixel LED strip and was quite impressed by the way it works. The tiny LED’s have an inbuilt driver IC which helps us to control each LED individually and can produce a wide spectrum of colors. Being a garish person who is obsessed with

Smart Phone Controlled Arduino Mood Light with Alarm Continue Reading

SPECTRUM ANALYZER CIRCUIT ARDUINO UNO 1

SPECTRUM ANALYZER CIRCUIT ARDUINO UNO

the Arduino Uno module held with MAX7219 8×8 LED matrix display module graphic equalizer spectrum analyzer and the filter driver in the project 2 integration of MSGEQ7. In addition, with Arduino MAX7219 for code… Electronics Projects, Spectrum Analyzer Circuit Arduino Uno “arduino projects, microcontroller projects, “ the Arduino Uno module held with MAX7219 8×8 LED matrix display module graphic equalizer spectrum

SPECTRUM ANALYZER CIRCUIT ARDUINO UNO Continue Reading

ARDUINO LED SPECTRUM ANALYZER 2

SPECTRUM ANALYZER CIRCUIT ARDUINO RGB LED STRIP

the spectrum analyzer circuit a project of Arduino Duemilanove Module 7-band graphic equalizer on board sound on the ground floor MSGEQ7 used to integrate MSGEQ7 is a very talented 8-pin ICS in the frequency…Electronics Projects, Spectrum Analyzer Circuit Arduino RGB Led Strip “arduino projects, microcontroller projects, “ the spectrum analyzer circuit a project of Arduino Duemilanove Module 7-band graphic equalizer on board

SPECTRUM ANALYZER CIRCUIT ARDUINO RGB LED STRIP Continue Reading

Codename RGB

Codename RGB

Remotely control your RGB LED strip from your pc. Things used in this project Hardware components Arduino MKR1000 × 1 Power MOSFET N-Channel Might be something similar. × 3 RGB Led Strip Make sure its 12v dc (if Its not 12v you will have to have a power supply with the same voltage as your

Codename RGB Continue Reading

Scroll to Top