News & Updates

Record breaking 56 gbps receiver

Record-breaking 56 gbps receiver circuit for communications between CPUs

Electronics News Updates / By

Fujitsu Laboratories Ltd. today announced the development of a receiver circuit capable of receiving communications at 56 Gbps. This marks the world’s fastest data communications between CPUs equipped in next-generation servers. In recent years, raising data-processing speeds in servers has meant increasing CPU performance, together with boosting the speed of data communications between chips, such […]

Record-breaking 56 gbps receiver circuit for communications between CPUs Continue Reading

ULX3S – A POWERFUL OPEN HARDWARE ECP5 FPGA DEV BOARD

ULX3S – A POWERFUL, OPEN HARDWARE ECP5 FPGA DEV BOARD

Electronics News Updates / By

ULX3S is a fully open source, compact, robust, and affordable FPGA dev board equipped with a balanced selection of additional components and expansions. Although it was designed primarily as a teaching tool for mastering the principles of digital circuit design, ULX3S incorporates a wide array of features and interfaces that allow it to serve as a broadly useful

ULX3S – A POWERFUL, OPEN HARDWARE ECP5 FPGA DEV BOARD Continue Reading

2022 SCI FI CONTEST A STAR WARS MOUSE DROID OF YOUR VERY OWN

2022 SCI-FI CONTEST: A STAR WARS MOUSE DROID OF YOUR VERY OWN

Arduino News / By

The show-stealing droids of Star Wars, R2-D2 and C-3PO, are quite challenging to replicate at home, due to their size and complexity. [curiousmarc] had built the former, with much work going into drawing and design. The more humble Mouse Droid, as seen skittering about the halls of the Death Star, is a considerably easier build — especially with

2022 SCI-FI CONTEST: A STAR WARS MOUSE DROID OF YOUR VERY OWN Continue Reading

like timer includes LED driver and charger

like timer includes Sub-1V 555- LED driver and charger

Electronics News Updates / By

Semtech has introduced an analogue timer chip that runs from 0.9V, but can drive LEDs at over 3V. Called SX8122, to the timer it adds: a simple battery charger, a boost converter, and a power-down controller. “It is designed for on/off button debouncing, delayed start-up timing, programmable sequencing and timing-out in toys, remote control, electric

like timer includes Sub-1V 555- LED driver and charger Continue Reading

ARDUINO PRO IDE ALPHA PREVIEW WITH ADVANCED FEATURES IS NOW AVAILABLE

ARDUINO PRO IDE (ALPHA PREVIEW) WITH ADVANCED FEATURES IS NOW AVAILABLE

Electronics News Updates / By

The simplicity of the Arduino IDE has made it one of the most popular in the world — it’s easy enough for beginners and fast for advanced users. Millions of you have used it as your everyday tool to program projects and applications. We’ve listened to your feedback though, and it’s time for a new

ARDUINO PRO IDE (ALPHA PREVIEW) WITH ADVANCED FEATURES IS NOW AVAILABLE Continue Reading

LITHIUM COIN CELL CHARGER FOR RECHARGEABLE COIN BATTERIES

LITHIUM COIN CELL CHARGER FOR RECHARGEABLE COIN BATTERIES

Electronics News Updates / By

This versatile charger has been designed to charge Lithium Coin Cell Rechargeable CR2016/CR2025/CR2032 Coin Batteries. Just insert the battery to the holder, and plug in to any USB port to recharge, D3 Power LED, D1 LED indicates the charge cycle. The board has been designed to use dual chips, either BQ21040 IC from Texas instruments or MCP73831 from Microchip

LITHIUM COIN CELL CHARGER FOR RECHARGEABLE COIN BATTERIES Continue Reading

Scroll to Top