Home Improvement DIY: WiFi Gas Detector with Text Alerts




Hey guys, back with another little project that I’ve been fiddling with for the past week. With kids around, every parent is thinking how to make their home safer for the little ones and for everybody in general. One of the most dangerous thing in the house can be the stove and since we have a gas-powered one, I always wondered why there are no simple gas detectors that can be used around the stove, just to alert instantly that gas may be leaking.

Home Improvement DIY: WiFi Gas Detector with Text Alerts




Well, that was the moment when I decided to build one of my own. Having a Particle (Spark) Photon lying around, I decided to use that as a foundation for the project. I like the fact that they are very small and cheap, and also can be flashed over the Wi-Fi. Having that settled, I needed the gas sensor and some kind of alerting system.

For the gas sensor I went for an
MQ-4 gas sensor because it can detect methane (CH4) as well as natural gas (CNG).
I found out later that it’s quite sensitive to CO2 as well, which turned out to be very useful while testing the setup. If you’re planning to use one in your projects and never used one before, remember that the gas sensors have a burn-in time when they are powered. That is to say that the sensor needs time to warm up (anywhere between 2 and 10 minutes). This is because the actual sensor has a heating element that helps detect these gases and while that is cold, it will give erroneous readings.

For more detail: Home Improvement DIY: WiFi Gas Detector with Text Alerts




Clip to Evernote

Leave a Comment

(Spamcheck Enabled)

Read previous post:
Quickly KS0108B Graphic LCD 128×64 + Arduino
Quickly: KS0108B Graphic LCD 128×64 + Arduino

This is an incredibly quick post, and it is actually here simply because this thing was a pain to figure...

Close
Scroll to top