DIY SPEEDOMETER AND ODOMETER




Hey guys, this a instructable of how to make a bike speedometer.Yeah,you read it right the one that we use in car but only for 10$ .Well the first this for you to know is that this is the collaborated project of Mr_DIY_Electrician and paurushthemaker .So back to topic our project is all about a speedometer which has 3 modes as follow:-

Speedometer(for speed) and odometer(for distance)

Task1.-Cover 20 miles

Task2-Achieve 30mph speed

And yes one more thing is that this is a arduino speedometer so there is no limitation for imagination. Let’s Get Started………

DIY SPEEDOMETER AND ODOMETER




Step 1: HOW IT WORKS

The working of a project is simple. It is also very important to understand it for making the project. Basically the apparatus consists of the reed switch or the magnetic switch mounted on the frame of the cycle and a magnet mounted on the one of the spokes. As the wheel rotates the magnet triggers the switch every rotation. The signal go to the arduino which counts the no of rotation and finds the distance covered(you have to pre enter the diameter of your cycle). The arduino also measures the time and calculates the speed. The output from the arduino then goes to the lcd where it is shown in miles per hour (you can convert it if you want).

For More Details: DIY SPEEDOMETER AND ODOMETER




This Post / Project can also be found using search terms:

  • 3d 8x8x8 RGB led cube controller circuit diagram
  • arduino car odometer
  • odometer sequential circuits
Clip to Evernote

Leave a Comment

(Spamcheck Enabled)

Read previous post:
Multi-pole industrial relays provide more possibilities
Multi-pole industrial relays provide more possibilities

As we know, a relay is a very versatile component, able to realize also various “sequential” circuits, when for example...

Close
Scroll to top