Combining Arduino and other shield modules, we make a mobile phone named Arduino Phone. Meanwhile, we printed a shell for it with the 3D printer. Although it’s not such fine as you think, even a little bit clunky, it’s still very cool. That is the point this is a cell phone made by ourselves.
While, we can’t install Arduino Phone Apps limited by Arduino. So, if you want to play Angry Birds, then you need to do some big modifications on Arduino Phone. 🙂
Next, I will make a detailed explanation about the steps of making an Arduino Phone, including the hardware connection and software implementation.
Now, let’s begin.
PS: if you want get more infomation about Open Hardware, follow@HardwareWithYou in twitter. 🙂
Step 1: Preparing stuffs
At the very beginning, we’d better prepare the materials. Of course, most of these modules can be purchased directly, such as Arduino Uno, TFT Touch Shield and GPRS Shield.
Owning to we want to put our Arduino Phone into a 3D printed shell, and in order to adapt the size of this shell, we have to DIY a charging and discharging PCB board (including two parts) and an expansion PCB board which can connect to the headphone jack of GPRS Shield.
If you want to make a shell by yourself, you can directly take Lipo Rider, or something like this, as the charge sheet. Thus, you do not need to DIY PCB board in order to meet the size of the shell.
Step 2: Hardware Connection
After preparing the materials, we need to assemble the above electronic components to lay the foundation functional part of Arduino Phone.
1.Plug GPRS Shield into Arduino UNI, then, connect the TFT Touch Shield to GPRS.
2.Connect RTC module to Arduino UNO.
2.Plug into the power module, and connect your earphone to the headphone jack on GPRS.
Well, if you choose to use Lipo Rider, you can refer to this sort of connection.
Ok, now, we are going to get into the software program part.
Step 3: Programming and Test
This Arduino Phone contains the following main functions.
1. receive & send message, letter input
2. dial & answer calls
3. real time clock display
4. A convenient and concise UI, You can switch function by sliding your finger on the screen. A standard 12 key input method for inputting message.
You can get all of the Arduino Phone code from the Github, including the dependent libraries.
Before uploading code to the Arduino, you need to copy all the files in Libraries directory of source
code to Arduino-1.0.4\libraries folder.
However, a much more difficult problem is that this Arduino Phone hasn’t physical buttons
(except the Reset button switch and GPRS). So, how to manage UI will be a challenging task.
Fortunately, TFT Touch not only provides a display function, also a touch screen function.
Thus, we can manage the UI through gesture, like left-swipe and right-swipe.
It this step, we will show how ArduinoPhone works. And the picture indicates the workflow of ArduinoPhone.
Finally, opening ArduinoPhone.ino with Arduino IDE, then uplaod source code to ArduinoPhone.
For more detail: ArduinoPhone
EasyEDA: Ideas for Circuit Design, Innovation for Electronics Access
Free Circuit Design: Schematic – Simulation – PCB Layout – Gerber Viewer
Cheapest PCB Prototype: Only $2 for 10pcs 10×10cm PCBs, 24 hours Quick Turn, DHL Delivery in 3 Days