Arduino Wall Lamp




So, I have always wanted a nice lamp by the side of my bed, Something simple with out any buttons.
Of course this would mean it had to be wireless.I also wanted to use it from my bed but not getting out of my bed to turn it off. So it had to be remote controlled, So I picked up a arduino nano and a IR sensor to help me with the goal.
Arduino Wall Lamp




I have access to my schools laser cutter for this to help me with the materials part and also the making part.

Step 1: Parts

I used for this project:

Electronics:
1X Ardunio (I used a nano to fit in the casing I would make.)
1X Power Supply device (Must be able to support the arduino’s needs)
2X RGB LED (Any type works)
1X PCB or Stripboard ( I used a old lot that did not have a lot soldered on it)
1X IR sensor.
1X IR remote (any kind will do)

Materials:
1X Acrylic sheet (White)
1X Small acrylic sheet (clear)
1X Sandpaper ( IN case you don’t want to use a laser cutter to fog the clear acrilic)
4X Screws of your choice (What fits in your Wall?)

Step 2: Outer Casing

I had made drawings for this for a while and I decided to use ProDesktop to make this come alive and for this project to really get going.

To do this I had to make a nice curved design that could be cut out on a laser cutter and be made with glue.

Major Components in Project

 1X Laser cutter ( I used my schools one)
1X Solder
1X Soldering iron
1X Black tape ( To hide the arduino LED’s )

For more detail: Arduino Wall Lamp

 

 

 




Clip to Evernote

Leave a Comment

(Spamcheck Enabled)

Read previous post:
Sensor Less 3d Printed Robot
Sensor Less 3d Printed Robot

Tyree (he wears a tie and he has tires) actually smiles after he bumps into something (see video). Using an...

Close
Scroll to top