Want to play Pong on your computer with your Esplora? This example shows you how.
This example is designed to be used with a Processing sketch. Processing is an open source programming environment. The Esplora reads the slider and buttons and sends data to the Processing sketch serially over USB, and Processing uses the incoming data to move paddles in a game of Pong.
If you don’t have Processing installed on your computer, download it from the Processing site and follow the installation instructions.
Download the zip file containing the Processing sketch for this example.
You only need to unzip this folder inside your Processing sketches folder, and open the .pde file in Processing.
Software Required
Circuit
Only your Arduino Esplora is needed for this example.
Esplora board using slider and pushbuttons
Code
This example sends the states of the slider and three pushbuttons serially to the computer. The associated Processing sketch reads the serial data to control the paddles and the state of the game.
The data is always sent in the same order: slider, button 1, button 3, button 4. The data are separated by commas. The Serial.println() command that sends the final button also sends a newline character. The Processing sketch looks for the newline to know when it’s got all the sensor data.
[box color=”#985D00″ bg=”#FFF8CB” font=”verdana” fontsize=”14 ” radius=”20 ” border=”#985D12″ float=”right” head=”Major Components in Project” headbg=”#FFEB70″ headcolor=”#985D00″]
Hardware Required
- Arduino Esplora
[/box]
For more detail: Arduino Esplora Pong
