DIY Temperature & Humidity & Smoke Detector Alarm System

The working voltage of this system is DC5V. It can measure the current temperature, humidity and smoke. It can display real-time data by the 1602 LCD and can realize the sound and light alarm when in the dangerous temperature and humidity. It is a simply and easily to operate monitoring alarm system about temperature humidity and smoke.

DIY Temperature & Humidity & Smoke Detector Alarm System

Functions

1. When connected to the power supply, after the initialization of hardware, the 1602 LCD will display the current temperature,humidity and smoke volume

2. When we press the NO.1 key, the 1602 LCD will turn the page and enter the dangerous temperature setting page. At this time, press NO.2 key once, the dangerous temperature will add one. If the actual temperature is higher than the setting value, the green LED will light up, and at the same time the buzzer will alarm. When the actual temperature is lower than the dangerous temperature, the LED will go out and the alarm will stop.

3. When the 1602LCD display is on the second page, and we press the NO.1 key, you will see the 1602LCD turn to the third page and enter the dangerous humidity setting page. At this time, press the NO.3 key, and the dangerous humidity will add one. If the actual humidity is higher than the setting value, the red LED will light, at the same time the buzzer alarms. When the actual humidity is lower than the dangerous humidity, the LED will go out and buzzer stop alarming.

Provide Code and experimental effect

Code for your reference:

http://www.icstation.com/newsletter/eMarketing/alarm system code.txt

The experimental effect:

First, connect to the power supply. The LCD will display the first page of current temperature, humidity and smoke volume. When we press the NO.1 key, the LCD will turn the page and enter the dangerous temperature setting page. At this time, press NO.2 key once, and the dangerous temperature will add one. When we are at the dangerous temperature setting page, we press the NO.1 key again, you will see the LCD will turn to the first page, at this time use your hand to touch DHT11 humidity and temperature sensor module, you can observe that the temperature and humidity increase gradually (because the humidity and temperature of hand is higher than the air). When the temperature is higher than the temperature we set, the green LED will light and the buzzer will alarm. When the humidity is greater than the dangerous humidity we set, the red LED will light and the buzzer will alarm.

Read More:  DIY Temperature & Humidity & Smoke Detector Alarm System


About The Author

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough research and presenting information in a structured and logical format.

Follow Us:
LinkedinTwitter

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top