This is a quick arduino project that is great for beginners. Enjoy! There is a video on the last step!
Step 1: What you Need
To build this project you will need:
10 LEDs, any color will do.
Some wire, I used a ribbon cable I had
Most importantly, an Arduino
Perhaps some electrical tape
Prototyping board
Step 2: Build it!
Start off by arranging your LEDs on the proto board however you choose, I chose to place them in an oval shape.
After that, solder them to the board. After they are soldered, solder all the cathodes (shorter leads, – or the lead that has the flat side) together. Then, solder a wire to each anode (other lead of the LEDs) to a wire.
For more detail: Arduino Circular Cylon!