12V Lead Acid Battery Voltage Monitor




This project is a 12V Lead Acid Battery Voltage Monitor

Description

12V Lead Acid Battery Monitor is a simple project which tells you the voltage of your Lead acid battery visually with the help of 10 LED’s.  This project is based on the popular LM3914 IC from Texas Instruments.

The LM3914 senses the voltage level at the input pin and drives the 10 light emitting diodes based on the voltage detected on input connector. Circuit works on same battery, doesn’t not require separate supply input. Jumper is used to select the DOT mode or bar graph mode.




12V Lead Acid Battery Voltage Monitor




Specifications

  • Supply input 15 VDC Max
  • Maximum and Minimum range selectable with onboard preset
  • Output 10 LED’s
  • 2 Types of display Bar and Dot selectable by a jumper
  • Very low current consumption, typical 100 mA
  • Header connector for connecting power / voltage in
  • Four mounting holes of 3.2 mm each
  • PCB dimensions 37 mm x 75 mm

For More Details:  12V Lead Acid Battery Voltage Monitor




Clip to Evernote

Leave a Comment

(Spamcheck Enabled)

Read previous post:
Mobile Phone Controlled Robot Car
Mobile Phone Controlled Robot Car using G-Sensor and Arduino

In this article, we are going to Control the Robot Car through the G sensor of our mobile phone and...

Close
Scroll to top